logo

Tag : life science lead generation

Small Steps

Carlton Hoyt 11:58 am , December 12, 2013

For better conversion, allow your customers to take smaller stepsIt’s enticing to try to close every prospect at the first opportunity. You can certainly rationalize doing so – you’re just trying to make the most of every opportunity, ASAP. Attempting to do so, however, can drive away your customers by forcing them to choose before they are ready to buy. While this may seem obvious in theory, life science marketers and salespeople routinely attempt to push their customers through their buying journey.

Your scientist-customers are risk-averse. If a customer isn’t sure that your product or service can perform the job they need it to perform, or if they don’t yet see that it is worth the price, they’ll view the purchase as being a high-risk endeavor. Asking a fresh prospect to make a purchase is a very big step for them – it involves a lot of risk since they are not yet certain about the utility and value of your product. The conversion of such a step would be very, very low.

To improve your conversion, you must allow your prospects to take smaller steps. Break up the buying journey into easily digestible chunks. For instance, a prospect whose email address you received from a conference may be sent an series of emails linked to various pieces of content. They may be invited to view a demo video, then subsequently given a demonstration. Perhaps after that there is a free trial, and only then would they be given the “hard sell”. This is merely an illustrative example, but one in which we have broken up one potentially huge step (visiting a booth at a conference → buying a product) into many smaller, less risky steps.

Marketers can also use these small steps in conjunction with marketing automation, CRM and / or analytics software to gain more insights into the customer. These insights may be subsequently fed to sales and / or used to help score the leads to help ensure that sales resources are deployed effectively.

Any buying journey can be broken up into an infinitesimal amount of steps, but we don’t want to make the buying journey too long by breaking it into an extremely large number of tiny steps – or, even worse, to decrease conversion by providing too many opportunities to drop out of the process. Additionally, not every product has the same amount of risk and will require the same amount of steps. Generally speaking, products which are more novel to the customer, products which are complicated, more expensive products, and products which are more central to the scientists’ research will carry more risk and therefore require more steps. So how do we know how many steps we might need? Consider the informational requirements of the average customer when making a purchasing decision and develop a content roadmap. This well help you determine the appropriate content which should be delivered, and the nature of the content should enlighten you as to the form it should take. Always allow the customer a direct path to purchase and contact high-quality leads directly to nudge them into making a decision.

One final note – the “small steps” notion does not apply only to the actual purchase. Asking a fresh prospect to give up a plethora of personal information right away will also lead to a low conversion. Ensure that you don’t place any obstructively large steps in your customer’s way.

"To put our expertise in demand generation to work for your life science company, contact BioBM. When we couple your great products and services with our expertise in demand generation, we’ll achieve great results."
Blog / Demand Generation 11:58 am , December 12, 2013

Leads 101: Part 3

Carlton Hoyt 8:58 am , December 4, 2013

Lead Scoring & Lead Nurture in the Life Sciences.This post is the last in a three-part series. For the first post on lead generation, click here. For the second post on responding to leads, click here.

Lead Scoring

In order to help determine the appropriate course of action for any given lead, such as when it is appropriate to have sales actively pursue a lead, it is important to score these leads. Generally, scoring is performed on two separate levels: profile scoring and engagement scoring. Profile scoring involves determining how closely a lead’s attributes (e.g. company, industry, job title, seniority, job function, etc.) match those of an ideal customer profile. Engagement scoring involves determining how much interest a lead has shown based on their previous actions. These could include downloading an article, visiting a website, attending a webinar, visiting a conference booth, filling out a contact form, etc. Note that both profile scoring and engagement scoring involve set but arbitrary values. It is up to you to decide what is most important and how each factor within each score should be weighted, but take care when doing so as studies have shown disconnects between what companies state their primary marketing targets are, how they allocate their resources, and what qualifications they use for lead scoring. If you find that your own scoring isn’t ideal, change it! It was arbitrary in the first place!

Leads are generally considered qualified if they cross a threshold of scoring, at which point they are pushed to sales for active pursuit of an opportunity. Don’t be too strict with your qualification criteria. According to the marketing automation platform Eloqua, less than 50% of companies have a single “perfect” lead which is in the highest scoring bracket on a profile basis and an engagement basis.

Nurturing Leads

For leads which are not yet qualified, they should be nurtured via a “content drip” – a slow, steady exposure to educational and / or persuasive content designed to advance the leads through the buying journey. At most basic, this could be a series of automated emails. Ideally, if resources allow, this content drip should be based on prior behavior. For instance, if a lead is gained through a piece of educational content, then it may be prudent to first send that lead opportunities to download more educational content in support of the first piece of content, then only if they download another would persuasive content be sent.

For actionable, qualified leads it is critical to assess the value of a customer acquisition and from that point determine the appropriate level of resources to commit to each. According to a study from the United States Travel Association, face-to-face sales close 40% of prospects while inside sales close just 16%, making outside sales 2.5x more effective. However, the costs are widely different. Each contact by an outside sales rep costs about $300 – $500 whereas the average contact from an inside sales rep costs only $25 or $30, according to Mike Moorman of ZS Associates. In some cases, the nature of the product may dictate whether an outside or inside response is most appropriate, and the structure of your sales force can cause the costs of outside sales to vary widely, but don’t simply default to an inside approach because you can. You might be able to sell that $100,000 enterprise software license or that $200,000 research contract over the phone, but it may very well be worthwhile to send someone to the client site to increase the likelihood of closing the deal.

Closing Statements

While there are certainly a number of best practices that all life science marketers should follow, there is no “one-size-fits-all” method to generating and handling leads. In determining the best strategies and tactics, an understanding of your target market and your own situation is of first and foremost importance. It is when this understanding merges with best practices that marketers can achieve truly great results in generating demand for their life science companies.

"BioBM Consulting has been instrumental in growing demand for dozens of companies across the life science tools and services sector. If you have any questions pertaining to demand generation in the life sciences, we welcome you to contact us."
Blog / Demand Generation 8:58 am , December 4, 2013

Leads 101: Part 2

Carlton Hoyt 8:57 am , November 26, 2013

Responding to Leads to Maximize Conversion.This post is the second in a three-part series. Last week we discussed lead generation, and you can find that post here: https://biobm.com/2013/11/leads-101-part-1.

Responding to Inquiries

Unless you’re marketing and selling very high-value products to a relatively small audience, be it a niche market or a narrowly defined role, you’re probably relying fairly heavily on inbound marketing to drive lead generation. (If you’re not, you’re probably doing something wrong, such as relying too heavily on distributors to do your marketing for you.) Inbound leads go cold extraordinarily quickly, so it is critical to respond as soon as possible. A study published in Harvard Business Review study found that contacting potential customers within an hour of receiving a inquiry leads to a seven times higher qualification rate than contacting the an hour later and a 60 times higher qualification rate than waiting 24 hours or longer. To state this another way, waiting a day to get around to your inquiries could cost you over 98% of your leads.

So how can we reduce response time and thereby maximize conversion? A Velocify study asked just that question, and the answer was quite clear. 1) Automate your lead distribution to your sales force, 2) “push” your leads to your sales force rather than having them “pull” leads, and 3) send leads out in a “shotgun” fashion – send each lead out to multiple reps and allow the fastest to respond. Companies that did these three things were shown to have a downstream conversion rate 107% higher than those companies that handled their leads manually.

I didn’t imagine I would need to say this until I read about a study on the matter, but don’t forget to contact the people that place inquiries. You might imagine this should be obvious, yet a study of lead response behavior conducted by InsideSales.com which included data from 696 companies showed that 36% of inquiries placed through an online form were not responded to within two weeks! There’s simply no excuse for letter your leads slip through the cracks.

Remember that not every lead requires a response, however. For example, if a prospect is requesting a piece of content then depending on the nature of that content and the prospect’s past behavior it may not be helpful to contact the prospect personally, at least not if you’re delivering the content automatically. Likewise, if a lead is disqualified due to being well outside your target market, then courtesy aside, there is little value in a response. This brings us to our next topic of lead scoring, which we’ll discuss next week.

"The third and final part of this Leads 101 series will be on lead scoring and lead nurture and will be posted next week here: https://biobm.com/2013/12/leads-101-part-3. If you have any questions pertaining to demand generation in the life sciences, feel free to contact us."
Blog / Demand Generation 8:57 am , November 26, 2013

Leads 101: Part 1

Carlton Hoyt 12:04 pm , November 20, 2013

Lead Generation in the Life Sciences.Everyone wants more sales. Everyone wants more demand. Sales can’t come from nowhere and demand has to be realized somehow, and the way we marketers help generate sales and realize demand is, largely, through generating leads. According to a recent Webmarketing123 study, the top objective and the top challenge for B2B marketers (or at least digital B2B marketers) is generating leads. Lead generation has even become more of a focus in content marketing – something which has traditionally been more of a branding activity than a demand generation activity. With how central leads are to most marketers’ missions, I wanted to take a moment to reflect on leads in the life sciences as well as go over some of the myriad information out there and what it means for our industry – for marketers of life science tools and services.

Lead Generation

Let’s start at the top! Lead generation first requires an understanding of how much a lead is worth. Unless you can estimate the value of a standard lead, you won’t be able to determine what is an appropriate amount to spend on generating each lead. Assuming that all leads are created equal (they’re not, but we’ll say so for sake of simplicity) you can approximate the value of a lead by calculating the net present value of your average customer and multiplying by your conversion rate. If this number is very small, you’ll likely want to minimize the cost of lead acquisition. On the other hand if this number is extremely large, it will likely be worth spending more per lead to generate more leads – at least to a point.

Regardless of the value of the customer, the buying journey will be the critical factor in determining how to generate leads for your product or service. Based on the informational needs of the customer during this journey, which can be gathered through market research and validated through testing and analytics, you should be able to create a content roadmap which informs the campaign architecture and directs content creation efforts in support of lead generation.

In most circumstances, lead generation in the life sciences should be supported heavily by scientific content with a low barrier; for example, a white paper that requires only an email address to download. This is especially true if you have any kind of marketing automation in place, since the cost of a nurture campaign for low-quality leads can be incredibly small. The reason content is so important is to establish trust and, thereby, reduce perceived risk. Scientists are trained to be skeptical and will not readily accept the claims in your marketing as fact. Content helps overcome this through educating the audience on your technology, demonstrating your expertise, etc. This provides more confidence that your products / services will fulfill their need, thereby reducing perceived risk and increasing perceived value (a less risky purchase is a more valuable one), making it more likely that a scientist will buy. Additionally, downloading a piece of content in exchange for a small amount of personal information is a far lower barrier than placing an inquiry about a product and thereby requesting a sales call. For all but low-value products, these baby steps towards purchase are often necessary.

Keep in mind that contact forms greatly effect lead generation as well. Each additional field in a contact form leads to approximately a 12.5% decrease in form submissions. Keep forms as short as possible and also make sure they’re accessible without being in the way. You want prospects to be able to contact you easily at any time without feeling that you’re trying to push them into contacting you.

Of course, content and contact forms are all components of inbound lead generation. Inbound methods are great if scientists are looking for what you are selling. If not, you probably need to get your hands dirty and go and create your own leads. This can be done at conferences, via cold calling / cold emailing, or with good old-fashioned advertising. If you’ll be trying to generate leads at conferences, or even just fill up your database with prospect for downstream marketing, remember that conferences are a numbers game and talk to as many people as you can. If you decide to cold call or cold email, remember to be forthright and to the point. If you’ll be advertising to pull in your audience, consider using a content hook rather than a hard call to action about a product to play to scientists’ curiosity.

Next week we’ll be discussing responding to leads, including some best practices which can can lead to massive increases in conversion.

"This post is the first in a three-part series. Next week we will discuss responding to leads. You’ll be able to find that post here: https://biobm.com/2013/11/leads-101-part-2. The third and final part of this Leads 101 series will be on lead scoring and lead nurture and will be posted in approximately two weeks here: https://biobm.com/2013/12/leads-101-part-3. If you have any questions about anything related to demand generation in the life sciences, we welcome you to contact us."
Blog / Demand Generation 12:04 pm , November 20, 2013